产品概述 / Overview
安装于 10 MPa 双线终端式供脂系统的主管末端，将两路压差转换成电气换向信号。
Installed at the main ends of 10 MPa dual-line end-of-line grease systems, converting differential pressure into an electrical changeover signal.
Installed at the main ends of 10 MPa dual-line end-of-line grease systems, converting differential pressure into an electrical changeover signal.
选型与使用 / Selection and Service
下游连接分配器以更新阀内润滑脂，并预留开关检查空间。
Connect a downstream distributor to renew grease within the valve and allow space for switch inspection.
Connect a downstream distributor to renew grease within the valve and allow space for switch inspection.
技术资料 / Technical Data
技术图表及安装尺寸按所选型号对应。接口形式、压力等级、适用介质及安装空间请结合对应规格确认。
Use the technical sheets and installation dimensions for the selected model. Check connection form, pressure rating, lubricant compatibility and installation clearance.
Use the technical sheets and installation dimensions for the selected model. Check connection form, pressure rating, lubricant compatibility and installation clearance.
